*Scroll through product photos for technique examples
Enhanced model has an added adjustment tail at the front of the sling for easier adjustment during patrol carry. A sling catered for short barreled, precision gas-guns and primary weapon systems.
A two-point rifle sling designed for unconventional firing positions to maximize shooter stability. Specifically tailored for individuals who shoot off of tripods and barricades.
*Carabiner not included.
Features:
Sewn in loophole at rear of sling. Allows shooter to rapidly connect/disconnect sling to their belt for supported positions in the sitting, kneeling, standing, or during helo operations. (A carabiner is typically used to connect the sling to the belt.)
One handed adjustable sling length. Smoothly transition from different positions, or sling rifle across body and tighten sling, reducing profile to negotiate obstacles or tend to the wounded.
Duraflex QD buckle allows shooter to quickly detach themselves from the sling/rifle in an emergency.
1.25” webbing
No metal hardware used- reduces noise and doesn’t chew up your rifle stock
Lightweight – weighs just 5.5oz, a fraction of what traditional precision rifle slings weigh
Lifetime Warranty
Made in the USA with Mil-Spec materials
This day and age, the trend is for rifles to be made as light as possible. There is a contradicting trend for rifle slings to become bigger & heavier. Some "precision rifle" slings are weighing in over a pound, with bulky metal hardware and thick webbing. They are marketed to have huge load ratings up to several thousand pounds. But keep in mind that the sling hardware/mounting points are only rated for several hundred pounds.
Custom made Tripod Leg Covers. Made from high quality laser cut laminate. The covers offer protection and also serve as a base for attaching scrim or other camouflage material to break up the outline of the top sections. The also deaden the sound if anything comes into contact with the legs.
Kit includes:
3 x Laser cut covers
3 x Shock cord sections
3 x Toggles
Two sizes are available for our Tripods:
34cm long - Suitable for P.R.S.T
40cm long - Suitable for PIG 0311-G
Pig Skins Barricade Pad
Regular price
£12.75
Save £-12.75
PIG Skins Barricade Pad
"A Shot is Rarely Taken from the Prone"
The NEW Enhanced Version is now able to ergonomically contour
around smooth & cylinder shaped forends. Still retains forward/aft rigidness.
A rifle skid pad designed to reduce the effects of recoil while firing from hard surfaces. Keeps your scope on target for verification of bullet placement and for rapid follow-up shots. Allows a shooter to load into their rifle, due to the added grip surface of the barricade pad.
The PIG Skins replace the need to drag around a sand sock while firing from expedient, elevated positions such as hard cover and barricades.
Economic design and price point
Made of a recoil reducing urethane that is extremely UV resistant (same material used on our HOG & PIG Saddle units)
High quality, time tested Velcro brand used
Comes with two extra Velcro loop adhesive pads that easily adhere to any stock finish
Manufactured in the USA with American materials
Available in two sizes:
6” x 1.5"
4.5" x 1.5"
Pig Skins Barricade Pad w/Horn
Regular price
£12.75
Save £-12.75
PIG Skins Barricade Pad w/ HORN
"A Shot is Rarely Taken from the Prone"
The NEW Enhanced Version is now able to ergonomically contour
around smooth & cylinder shaped forends. Still retains forward/aft rigidness.
A rifle skid pad designed to reduce the effects of recoil while firing from hard surfaces. Keeps your scope on target for verification of bullet placement and for rapid follow-up shots. Allows a shooter to load into their rifle, due to the added grip surface of the barricade pad.
The PIG Skins replace the need to drag around a sand sock while firing from expedient, elevated positions such as hard cover and barricades.
Economic design and price point
Made of a recoil reducing urethane that is extremely UV resistant (same material used on our HOG & PIG Saddle units)
High quality, time tested Velcro brand used
Comes with two extra Velcro loop adhesive pads that easily adhere to any stock finish
Manufactured in the USA with American materials
War Veteran owned small business
Available in one size:
6” x 1.5"
MARC Picatinny Plate
Regular price
£56.72
Save £-56.72
Picatinny MARC Plate
(Multiuse Arca RC2 Connector)
Two Quick Detach Plates in One!
The Picatinny MARC Plate is a reversible mounting plate for the modular shooter.
From direct mounting a picatinny forend to a tripod head, to mounting a laser range finder to a picatinny spotting scope cage.
This unique mounting solution will increase the equipment flexibility of the modern outdoorsman.
The Picatinny MARC Plate has been designed to mount to both (1.5”/38mm) Arca-Swiss tripod clamps and legacy Manfrotto tripod heads that use RC2/200PL attachment plates.
The Patent Pending design prevents horizontal movement with Manfrotto tripod heads, and accommodates for Arca-Swiss plate retention slots.
An ultra lightweight mounting option with a minimalist footprint.
CNC machined aluminum construction
Stainless steel 1/4-20 mounting screw for reverse optic mounting
Removable recessed retention bolts
Made in USA
Multi Tool Mounting Screws
Regular price
£15.00
Save £-15.00
Multi-tool Mounting Screw Set
American lathe turned tripod plate screws
The easiest upgrade you could make for your tripod system.
Don't bet your stability and safety on cheap pot metal screws.
Sold as a set of 1 x 1/4-20 Screw & 1 x 3/8-16 Screw as an perfect upgrade for your DP-60R to HOG or PIG Saddle attachment.
