Sniper Support and Optic Accessories

The PIG0311-G tripod is based off of the budget friendly yet capable SLIK DX700PRO tripod. ShadowTech partnered up with Slik and started putting together several prototypes with beefed up specs, tighter tolerances and shooter specific features that are not readily available. Eight months of testing later they came up with this field tripod.

During testing they used several 50 cal rifles (Barrett M107 & McMillan Tac50) with great results regarding officer feedback and repeatable shot placement. Being unsure of what kind of garage cannon that might be placed on the PIG0311-G tripod, they decided to stick with a conservative 12Kg load rating.

A no-nonsense field tripod designed for the active outdoorsman.  This tripod was meant to get dirty, be thrown in trucks, and be used outside. Paired with a direct mounted PIG Saddle, this tripod can do almost anything a more expensive tripod kit can do (At a fraction the cost).

The Sunwayfoto FB-52 ball head is a great match with this tripod. 

• The short center column allows the shooter to get all the way down to a 11.5” high prone position.
• A removable, load bearing hook has been added to the bottom of the center column to hang weight, such as a backpack. The added weight will greatly increase tripod stability.
• The center column can fully rotate 365 degrees. This is a great feature for those who intend to direct mount a saddle to the PIG0311-G tripod.
• The tripod’s feet incorporate interchangeable rubber or spiked feet. (spiked feet are included)
• 12 Kg heavy duty weight rating. But don’t be surprised to see Barrett 50 cal’s being popped off this thing.
• Lightweight magnesium body with aluminum legs. 
• Three section extending legs with cam levers.   
• Finished off in flat OD Green paint job.

 *pictures show tripod being used with FB-52 Ball Head and PIG Saddle for illustrative purposes, available as to purchase as separate items.

Sunwayfoto DP-60R Universal Quick-Release Plate

The dual mounting bolt design is a superior, zero twist connection point.

The Sunwayfoto DP-60R Universal Quick-Release Plate is an Arca-type and RRS compatible plate made from CNC machined aluminum. It has a satin anodized finish that provides resistance to abrasion and corrosion. Dual safety-stop screws prevent the plate from being accidentally released from its clamp. Rubber mats on the top of the plate provide an anti-twist surface so that your camera stays aligned with the plate, and a slot on the plate allows you to attach a camera strap. Two hex keys are included for adjusting the safety-stop screws and camera mounting screws, two of which are provided: a 1/4″-20 and 3/8″-16.

Picatinny MARC Plate

(Multiuse Arca RC2 Connector)

Two Quick Detach Plates in One!

The Picatinny MARC Plate is a reversible mounting plate for the modular shooter. 

From direct mounting a picatinny forend to a tripod head, to mounting a laser range finder to a picatinny spotting scope cage. 

This unique mounting solution will increase the equipment flexibility of the modern outdoorsman. 

The Picatinny MARC Plate has been designed to mount to both (1.5”/38mm) Arca-Swiss tripod clamps and legacy Manfrotto tripod heads that use RC2/200PL attachment plates. 

The Patent Pending design prevents horizontal movement with Manfrotto tripod heads, and accommodates for Arca-Swiss plate retention slots. 

An ultra lightweight mounting option with a minimalist footprint. 

• CNC machined aluminum construction
• Stainless steel 1/4-20 mounting screw for reverse optic mounting 
• Removable recessed retention bolts
• Made in USA

Multi-tool Mounting Screw Set

American lathe turned tripod plate screws

The easiest upgrade you could make for your tripod system.

Don't bet your stability and safety on cheap pot metal screws. 

Sold as a set of 1 x 1/4-20 Screw &  1 x 3/8-16 Screw as an perfect upgrade for your DP-60R to HOG or PIG Saddle attachment. 

The SLICK is a complete modular Night Vision integration kit for the M151 Spotting Scope (Leupold Mk 4). The SLICK allows for the use of all current clip on Universal Night Sights and Thermal optics. The SLICK's mounting cage provides 8 positions to mount NVs, Lasers/Illuminators or red dots. The SLICK also has a permanently attached top rail for coaxial laser range finders, such as the WILCOX RAPTAR, or any other MIL STD 1913 mounted LRF. All hardware needed to install and operate on your tripod provided. Mil. Spec. Anodised Hard Coat Type III, Black. NSN 1006-01-672-7773

Cerakote Finishes are available as an option on request (+£85 Exc VAT)

The Air Armor Tech™ Tactical 12 inflatable scope cover is designed to protect an optic’s “zero,” structural integrity, and cosmetic features against significant blunt-force impact, as well as provide flotation for up to 10 Kg of weapon system. With an average of over 6cm of inflated air bladder surrounding the entire scope, the Tactical 12 is designed for 12-inch/30cm class optics mounted to a rifle system operating in extreme field environments.

Due to the slightly taller profile of most AR-style platforms and mounted optics, compared with traditional sporting rifles, the Tactical 12 extends farther down the side of the weapon, providing protection from the top of the optic to a position aligned with the bottom of the lower receiver and hand guard. Carrying your weapon in the field is also improved via the integrated carry handle located on top of the scope cover when not slung.

Made with mil-spec and Berry-compliant materials, this Made in the USA, patent-pending, Air Armor Tech manufactured product comprises of the following components:

• Outer material – 1,000 denier, urethane coated
• Inner material – 500 denier, urethane coated
• Bladder material – mil-spec 200 denier, urethane coated
• Inflation system – Air Armor Tech, patent-pending, 3-Pipe Inflation System

Included in the purchase of this product are the following:

• Quick Reference Guide
• Inflation bulb
• Tear-Aid^® repair patches

THE VOYEUR™ PRECISION, FINE-ADJUSTABLE RANGE TOOL

THE LATEST IN FLATLINE OPS INNOVATION AND PRECISION HARDWARE 

Viewing targets at long range, or capturing footage of a target is very susceptible to movement and long range visual error. Take guesswork, hand held movement and any chance of error out of the equation with the all new Voyeur™. The voyeur has three micro-precision points. You can move your scope or camera side to side (a), up or down (b) with absolute precision and extra-smooth tracking. The voyeur attaches to any standard tripod or bench mounted point system with ease. Simply attach to your camera or scope, and lock onto your tripod, and you are ready to go.

• Reduces unnecessary movement & long range visual error

• Dial-in your range finder target with pin-point accuracy  

• Extra-smooth horizontal and vertical precision tracking

• “True horizontal” bubble level for reticle acquisition

• 3 micro-precision adjustment points  

• Easy install for quick set up and take down

* Some equipment and brands you are attaching may require the HIRAQ™ Riser. The HIRAQ raises up the item above the Voyeur adjustment knobs. Included in the box. 

100% DESIGNED AND MANUFACTURED IN THE U.S.A.

Global and US Patent Pending

HALO-X™ ULTRA PRECISION RIGID SCOPE LEVEL

The latest level innovation from our design team at Flatline Ops.

Our new Halo-X is a game changer. Originally designed for Leupold's Mark 5HD (U.S. Army PSR, M110 and MK22) military optic programs, this unique and precision engineered level is now available for civilian use.

Machined from ultra-strong 7075-T6 aircraft aluminium this is our lightest and strongest level. Weighing less than half an ounce, and only 5/16" wide, it's our most minimal level for crowded scope tubes with extensive vegetation. 

Product Features:

• Vial-Bridge™ dual vial connection points and suspended bubble level with reflective platform, allows maximum light refraction for enhanced fluid illumination and sight acquisition in all outdoor and harsh conditions.

• Jaw-Bone™ barrel hinge point for easy installation.

• Single top strap screw for ease of installation and access.

• Ultra-light, high strength 7075-T6 aircraft aluminium.

• Mil Spec Type III hard anodising for durability

• Built for left or right handed shooters

** PATENT PENDING**

TECH SPECS