Online Store

Air Armor Tech Aviation Case.

Designed and developed for the F-35 Lightning II aircraft helmet to protect the equipment whilst being moved when not worn. 

the Helmet Bag will roll down into a small form factor and can be stowed in the cockpit. Suitable for all modern aviation helmets.

 For more info including Trade & MOD pricing please contact us:

info@tacticalcoatings.co.uk

+44 1981 458007

ENHANCED SS Loophole Rifle Sling

INCREASE YOUR STABILITY BY 75%

*Scroll through product photos for technique examples

Enhanced model has an added adjustment tail at the front of the sling for easier adjustment during patrol carry. A sling catered for short barreled, precision gas-guns and primary weapon systems. 

A two-point rifle sling designed for unconventional firing positions to maximize shooter stability. Specifically tailored for individuals who shoot off of tripods and barricades.

*Carabiner not included.

Features:

• Sewn in loophole at rear of sling. Allows shooter to rapidly connect/disconnect sling to their belt for supported positions in the sitting, kneeling, standing, or during helo operations. (A carabiner is typically used to connect the sling to the belt.)
• One handed adjustable sling length. Smoothly transition from different positions, or sling rifle across body and tighten sling, reducing profile to negotiate obstacles or tend to the wounded.
  
• Duraflex QD buckle allows shooter to quickly detach themselves from the sling/rifle in an emergency.
• 1.25” webbing
• No metal hardware used- reduces noise and doesn’t chew up your rifle stock
• Lightweight – weighs just 5.5oz, a fraction of what traditional precision rifle slings weigh
• Lifetime Warranty
• Made in the USA with Mil-Spec materials

This day and age, the trend is for rifles to be made as light as possible. There is a contradicting trend for rifle slings to become bigger & heavier. Some "precision rifle" slings are weighing in over a pound, with bulky metal hardware and thick webbing. They are marketed to have huge load ratings up to several thousand pounds. But keep in mind that the sling hardware/mounting points are only rated for several hundred pounds. 

Keep it simple and shoot straight. 

This is the latest model HOG Saddle with some improvements from the original design. The MOD7 is currently a standard issue item in the US Marine Corps and other various Special Operations units worldwide.

List of improvements:

1.  Opens 1/4" wider than original model.   (2 11/16" Open, 1 1/2" Closed)
2.  Incorporates a retention button screw to prevent unintentional dissassembly in the field
3.  Weighs less than 16 ounces
4.  Added cut-outs to the base of the HOG Saddle. These narrow slots better integrate with tripod heads or QR plates that have anti-rotation video pins.

MOD7 HOG Saddle Specs:

• CNC machined from a solid block of aluminum
• Black oxide stainless steel bolt and guide rods
• Hard anodized finish (a resilient surface which serves as an excellent base coat for custom camouflage paint)
• 1/4-20 stainless steel mounting threads and 3/8-16 back up threads
• CNC machined torque knob assembly with retention button screw to prevent disassembly in the field (opens 1/4in wider than previous model)
• Stainless steel noise dampening tension spring
• 1/4 inch thick, recessed urethane pads specifically engineered to absorb rifle recoil and reduce muzzle jump
• Anti-rotation slots to accept tripod QD plates that have video pins
• Superior resistance to corrosion
• Weight: 15.8oz/448g

MARC M-LOK Plate

(Multiuse Arca RC2 Connector)

Two Quick Detach Plates in One!

The MARC M-LOK plate has been designed to mount to both (1.5”/38mm) Arca-Swiss tripod clamps and legacy Manfrotto tripod heads that use RC2/200PL attachment plates. 

The Patent Pending design prevents horizontal movement with Manfrotto tripod heads, and accommodates for Arca-Swiss plate retention slots and Feisol retention plungers. 

A lightweight option for mounting a rifle or spotting scope cage to a tripod. 

• CNC machined aluminum construction
• Official MAGPUL M-LOK hardware
• Removable recessed retention bolts
• Made in USA

Picatinny MARC Plate

(Multiuse Arca RC2 Connector)

Two Quick Detach Plates in One!

The Picatinny MARC Plate is a reversible mounting plate for the modular shooter. 

From direct mounting a picatinny forend to a tripod head, to mounting a laser range finder to a picatinny spotting scope cage. 

This unique mounting solution will increase the equipment flexibility of the modern outdoorsman. 

The Picatinny MARC Plate has been designed to mount to both (1.5”/38mm) Arca-Swiss tripod clamps and legacy Manfrotto tripod heads that use RC2/200PL attachment plates. 

The Patent Pending design prevents horizontal movement with Manfrotto tripod heads, and accommodates for Arca-Swiss plate retention slots. 

An ultra lightweight mounting option with a minimalist footprint. 

• CNC machined aluminum construction
• Stainless steel 1/4-20 mounting screw for reverse optic mounting 
• Removable recessed retention bolts
• Made in USA

Multi-tool Mounting Screw Set

American lathe turned tripod plate screws

The easiest upgrade you could make for your tripod system.

Don't bet your stability and safety on cheap pot metal screws. 

Sold as a set of 1 x 1/4-20 Screw &  1 x 3/8-16 Screw as an perfect upgrade for your DP-60R to HOG or PIG Saddle attachment. 

The ultimate in light weight precision shooting tripods, with a saving of £100 by purchasing as a system.

The P.R.S.T Elite Tripod System consists of:

P.R.S.T Elite Carbon Fibre Tripod

Sunwayfoto XB-44 DL GNN Ball Head

Sunwayfoto DP-60R QD Plate

HOG Saddle MOD 7 

Retail Total £1055.65    Package Price - £955.65

The P.R.S.T Elite (Precision Rifle Shooter Tripod - Elite) is a second generation shooting specific tripod designed by snipers for use in a multitude of ways from the long distance shooter to a military sniper. The Elite version has a smaller form factor than the original P.R.S.T due to a unique centre yoke that offers a more compact centre column area with slots to attach slings, counterweights and camouflage. The P.R.S.T forms part of the new L115 Sniper Stabilisation Platform for the British Army. Its simple but effective design works! Photography tripods like those of Manfrotto are not designed to be treated hard and exposed to the weight and conditions that many shooters find themselves in. The P.R.S.T Elite will allow shooting from raised prone through to standing. When combined with the HOG Saddle MOD 7 the tripod system weighs in at a total of 2.2Kg.

• Material: Carbon fibre legs with machined aluminum components
• Legs: Four section legs with user serviceable cam-lock levers
• Finish:  Cerakote Elite Tan 
• Feet: Includes two interchangeable sets. Rubber feed and spiked steel feet.
• Center column: 6.5 inch length. Short enough to splay tripod out for high prone position.
• Center column function: The center column not only adjusts vertically, it is able to rotate. A great feature for users who direct mount a saddle to their tripod without a ball head.
• Mounting thread: 3/8"-16

Effortlessly maintain your rifle’s sights across a field or hillside waiting for that trophy buck. Maximize your ability to make an accurate shot for a responsible one-shot kill. The PIG Saddle is a rigid, steady support with unequaled versatility and portability. A rock solid platform that is flexible enough to attain those tough shots at a moment’s notice.

PIG Saddle by Shadow Tech, LLC

Designed by a Marine Scout Sniper and OIF Veteran, a rifle rest tailored to the avid hunter and outdoorsman. Universally mounts to any tripod platform which incorporates 1/4-20 or 3/8-16 thread attachments.  (patented)

Features

• Weight: 1.4 lbs/635 grams
• Steel construction- to facilitate years of dependability
• Melonite finish provides superior corrosion resistance
• CNC machined aluminum knob, OD Green anodized
• UV resistant pads- specifically engineered to absorb rifle recoil and reduce muzzle jump
• Steel 1/4-20 mounting threads and 3/8-16 back up threads
• One handed operation
• Manufactured in the USA

PIG Skins Barricade Pad

"A Shot is Rarely Taken from the Prone"

The NEW Enhanced Version is now able to ergonomically contour

around smooth & cylinder shaped forends. Still retains forward/aft rigidness.

 A rifle skid pad designed to reduce the effects of recoil while firing from hard surfaces. Keeps your scope on target for verification of bullet placement and for rapid follow-up shots. Allows a shooter to load into their rifle, due to the added grip surface of the barricade pad.

The PIG Skins replace the need to drag around a sand sock while firing from expedient, elevated positions such as hard cover and barricades.

• Economic design and price point
• Made of a recoil reducing urethane that is extremely UV resistant (same material used on our HOG & PIG Saddle units)
• High quality, time tested Velcro brand used
• Comes with two extra Velcro loop adhesive pads that easily adhere to any stock finish
• Manufactured in the USA with American materials

 Available in two sizes:

6” x 1.5"

4.5" x 1.5"

PIG Skins Barricade Pad w/ HORN

"A Shot is Rarely Taken from the Prone"

The NEW Enhanced Version is now able to ergonomically contour 

around smooth & cylinder shaped forends. Still retains forward/aft rigidness.

 A rifle skid pad designed to reduce the effects of recoil while firing from hard surfaces. Keeps your scope on target for verification of bullet placement and for rapid follow-up shots. Allows a shooter to load into their rifle, due to the added grip surface of the barricade pad.

The PIG Skins replace the need to drag around a sand sock while firing from expedient, elevated positions such as hard cover and barricades.

• Economic design and price point
• Made of a recoil reducing urethane that is extremely UV resistant (same material used on our HOG & PIG Saddle units)
• High quality, time tested Velcro brand used
• Comes with two extra Velcro loop adhesive pads that easily adhere to any stock finish
• Manufactured in the USA with American materials
• War Veteran owned small business

Available in one size:

6” x 1.5"

The PIG0311-G tripod is based off of the budget friendly yet capable SLIK DX700PRO tripod. ShadowTech partnered up with Slik and started putting together several prototypes with beefed up specs, tighter tolerances and shooter specific features that are not readily available. Eight months of testing later they came up with this field tripod.

During testing they used several 50 cal rifles (Barrett M107 & McMillan Tac50) with great results regarding officer feedback and repeatable shot placement. Being unsure of what kind of garage cannon that might be placed on the PIG0311-G tripod, they decided to stick with a conservative 12Kg load rating.

A no-nonsense field tripod designed for the active outdoorsman.  This tripod was meant to get dirty, be thrown in trucks, and be used outside. Paired with a direct mounted PIG Saddle, this tripod can do almost anything a more expensive tripod kit can do (At a fraction the cost).

The Sunwayfoto FB-52 ball head is a great match with this tripod. 

• The short center column allows the shooter to get all the way down to a 11.5” high prone position.
• A removable, load bearing hook has been added to the bottom of the center column to hang weight, such as a backpack. The added weight will greatly increase tripod stability.
• The center column can fully rotate 365 degrees. This is a great feature for those who intend to direct mount a saddle to the PIG0311-G tripod.
• The tripod’s feet incorporate interchangeable rubber or spiked feet. (spiked feet are included)
• 12 Kg heavy duty weight rating. But don’t be surprised to see Barrett 50 cal’s being popped off this thing.
• Lightweight magnesium body with aluminum legs. 
• Three section extending legs with cam levers.   
• Finished off in flat OD Green paint job.

 *pictures show tripod being used with FB-52 Ball Head and PIG Saddle for illustrative purposes, available as to purchase as separate items.

Sunwayfoto DP-60R Universal Quick-Release Plate

The dual mounting bolt design is a superior, zero twist connection point.

The Sunwayfoto DP-60R Universal Quick-Release Plate is an Arca-type and RRS compatible plate made from CNC machined aluminum. It has a satin anodized finish that provides resistance to abrasion and corrosion. Dual safety-stop screws prevent the plate from being accidentally released from its clamp. Rubber mats on the top of the plate provide an anti-twist surface so that your camera stays aligned with the plate, and a slot on the plate allows you to attach a camera strap. Two hex keys are included for adjusting the safety-stop screws and camera mounting screws, two of which are provided: a 1/4″-20 and 3/8″-16.

At the request of HOG Saddle, Sunwayfoto  made the FB-52 even shorter by machining off the neck of the ball head. (creating the GNN series)

This reduces damaging stress/leverage to internal parts, increases stability, & still allows for 22 degrees of elevation adjustment. Approximately 46 degrees of vertical travel total.   

* This product requires the DP-60R/MARC QD plate or an equivalent Arca QD plate to allow a HOG or PIG Saddle to mount to the ballhead.

The Sunwayfoto GNN FB-52 is the strongest model of the FB series ball heads. It exemplifies the customary principle of simplicity, very easy-to-carry, easy-to-operate and provides customers with stable and smooth using experience. This ballhead is exquisitely machined from T6061 aerospace grade aluminum alloy, with Type-III hard-anodized finish. Compared with other models of the same series, the GNN FB-52 has the highest load rating and largest ball joint diameter for extended service life.  

• Arca-Swiss QD plate compatible 38mm/1.5"
• 52mm Ball Joint
• 44lb Max Load
• Bottom Thread:UNC 3/8”- 16
• Side Tilt:22°

Custom made Tripod Leg Covers. Made from high quality laser cut laminate. The covers offer protection and also serve as a base for attaching scrim or other camouflage material to break up the outline of the top sections. The also deaden the sound if anything comes into contact with the legs. 

Kit includes:

3 x Laser cut covers

3 x Shock cord sections 

3 x Toggles

Two sizes are available for our Tripods:

34cm long - Suitable for P.R.S.T

40cm long - Suitable for PIG 0311-G